24/7 emergency plumber in Los Angeles, here when you need it most.

Rooter service uses a motorized auger (also called a rooter machine or drain snake) to mechanically break through and remove stubborn blockages inside drain and sewer pipes — typically caused by tree root intrusions, grease and fat buildup, or compacted debris. You need rooter service when standard plunging and chemical drain cleaners can't clear the clog, or when multiple drains in your home back up at the same time (a sign the clog is in your main sewer line rather than a branch drain). Rooter Rescue Plumbing provides same-day rooter and drain cleaning service — call 877-481-4075.

Emergency plumbing costs depend on the nature of the problem, the materials needed, and the complexity of access. Common emergency repairs — burst pipe patches, main line clogs, and failed shut-off valves — typically range from $150–$500. Major repairs like slab leak fixes, full repipes, or water heater replacements cost more. At Rooter Rescue Plumbing, we provide a flat-rate written quote before any work starts, so you know the exact cost upfront. There are no hidden fees for after-hours or weekend calls — what we quote is what you pay.

Yes — Rooter Rescue Plumbing provides true 24/7 emergency plumbing service, including nights, weekends, and all major holidays. Plumbing emergencies don't follow business hours, so neither do we. Whether you have a burst pipe actively flooding your home, a sewage backup, a failed water heater on a Sunday morning, or a gas line concern, call 877-481-4075 at any hour and a live dispatcher will answer and get a licensed technician headed to you promptly.

The most common signs of a hidden water leak include: a sudden unexplained increase in your monthly water bill, the sound of running water when all fixtures are off, warm spots or soft spots on floors (often a slab leak), wet or discolored patches on walls or ceilings, mold or mildew growth in areas that shouldn't be damp, and a drop in water pressure throughout the home. If you notice any of these, don't wait — small leaks cause significant structural damage over time. Our technicians use non-invasive electronic listening equipment and thermal imaging cameras to locate leaks behind walls, under concrete slabs, and underground without destructive exploratory demo.

A whole-home repipe for an average-sized house with 2–3 bathrooms typically takes 1–3 business days, depending on the square footage, number of fixtures, pipe material chosen (copper, PEX-A, or CPVC), and how accessible your existing pipes are. In most cases, water is shut off only during working hours and restored each evening so you're not left without running water overnight. Before starting any repipe job, Rooter Rescue Plumbing provides a written timeline and material breakdown so you know exactly what to expect.

1. Shut off your main water supply valve immediately — it's typically located at the water meter, in a utility room, or near the foundation. Every adult in your home should know where this is before an emergency happens. 2. Turn off your water heater to prevent it from running dry and overheating. 3. Open faucets throughout the house to relieve pressure and drain the remaining water from your lines. 4. Move furniture, electronics, and valuables out of the water's path. 5. Call Rooter Rescue Plumbing at 877-481-4075 right away. Do not attempt a permanent repair with tape, pipe clamps, or epoxy — these fail quickly and can cause greater damage. A licensed plumber needs to assess and fix the break properly.

In most cases, yes. Trenchless sewer line repair — pipe bursting or non-invasive epoxy pipe lining — rebuilds or replaces a damaged lateral through one or two small access pits instead of a trench the full length of the line. That usually means a 1–2 day job instead of a week, and no torn-up lawn, driveway, or mature trees to restore afterward. Traditional excavation still makes sense when a line has collapsed completely, has a severe belly (sag), or needs re-routing. We run a sewer camera inspection first and show you the footage so you can see which option fits your pipe.

Hydro jetting drain cleaning uses a high-pressure water jet to scour grease, mineral scale, and tree roots off the inside wall of a drain or sewer line, rather than just boring a hole through the clog like a snake. It is the most effective way to stop recurring main-line backups. Because the pressure is adjustable, it is safe for most clay, cast-iron, ABS, and PVC lines in good structural condition — which is why we always camera-inspect older pipes first and switch to a mechanical rooter if a section is too fragile to jet.

Often, yes. The City of Los Angeles and many surrounding cities require an approved seismic gas shut-off valve (or an excess-flow valve) on new construction and qualifying remodels, and buyers, lenders, and escrow officers frequently request one before closing. California also requires water heaters to be seismically strapped, and homes built before 1994 must have water-conserving plumbing fixtures. Requirements vary by city, so we confirm what your jurisdiction needs, install and permit the valve, and give you documentation for escrow.

Usually, yes. Most accessory dwelling units connect to the main house sewer lateral rather than getting their own connection to the city sewer. The existing lateral has to be in good condition and sized for the extra fixtures, so we start with a sewer camera inspection. If the ADU sits below the grade of the sewer line, a sewage ejector pump may be required. Every ADU sewer tie-in needs correct slope, cleanouts, and venting to meet plumbing code and pass inspection with LADBS or your local building department.

Frequently. LADWP, SoCalGas, and regional water agencies regularly run rebate programs for qualifying high-efficiency tankless water heaters, heat pump water heaters, and water-saving fixtures. Program rules and amounts change throughout the year, so before you buy we check which LADWP and SoCalGas utility rebates your address currently qualifies for, install eligible equipment, and provide the model numbers and invoice you need to submit your claim.

If your home was built before the 1960s and still has galvanized steel supply lines, a single leak is usually a warning sign rather than a one-off. Galvanized pipe corrodes from the inside, so low water pressure, rusty or brown water, and repeat pinhole leaks tend to keep coming. Whole-house copper repiping (or PEX-A) solves all of those at once and typically takes 1–3 days. We will always quote the spot repair alongside the repipe so you can make the call.

Most Southern California homes benefit from one. Much of the region’s water is imported and naturally hard, and the calcium and magnesium it carries cause mineral scale buildup and hard water corrosion inside water heaters, tankless heat exchangers, fixtures, and appliances. A whole-house hard water softener — or a softener paired with carbon filtration for taste and chlorine — protects that equipment and cuts down on spotting and soap scum. We test your water on site and size the system to your household.

A hot water recirculation pump keeps hot water moving through your supply lines so it arrives at the faucet or shower in seconds instead of a minute or more. That stops the gallons of cold water that normally run down the drain while you wait — a meaningful saving in drought-prone Los Angeles. Timer and on-demand models keep energy use low, and most installs take a few hours with no wall demolition.

Yes. We install, repair, and test backflow prevention assemblies for commercial properties, apartment and multi-unit buildings, fire sprinkler lines, and irrigation systems. Most Southern California water purveyors require backflow devices to be tested every year, and we file the test results so your property stays compliant.

Yes — our free main drain camera inspection special is included with any paid hydro jetting or main-line clearing. After the line is cleared, we run the camera the full length of the lateral so you can see whether roots, cracks, or offsets caused the backup, and we can provide the recording on request. Mention code SEECAM when you book.

Yes, absolutely. All Rooter Rescue Plumbing technicians are fully licensed plumbing contractors, bonded, and covered by both general liability insurance and workers' compensation insurance. This matters for you as a homeowner — if a contractor is injured on your property without workers' comp, you can be held liable. Our licensing means we comply with local plumbing codes, pull required permits on applicable jobs, and are accountable to the state licensing board. You can ask to see credentials at any time, and we'll happily show them.

Yes. All labor performed by Rooter Rescue Plumbing is backed by our written satisfaction guarantee — if something we repaired fails or wasn't done to your satisfaction, we return to make it right at no additional charge. Parts and materials we install carry their respective manufacturer's warranties. We stand behind our work because our reputation is built on repeat customers and referrals: doing the job right the first time is the only way we stay in business.